AC1200 Wave 1, 802.11ac/n/g/a/b Dual band Concurrent

Ceiling Mount Access Point

Perfect for business like schools, hotels, airports, shopping malls etc. The Ceiling AP supports 802.11ac/b/g/n and can be powered by PoE. It’s a perfect companion for the AP utility (AP system manager), allowing you to control your AP devices.


  • Compatible with IEEE 802.11ac wave 1 technology provides 2TX/2RX wireless speed up to 866Mbps data rate
  • Compatible with IEEE 802.11n high rate standard to provide wireless speed of 300Mbps data rate
  • Compatible with IEEE 802.11g high rate standard to provide wireless speed of 54Mbps data rate
  • Compatible with IEEE 802.3at PoE
  • Simultaneously transmit both 2.4 GHz and 5 GHz wireless networks
  • IEEE 802.11b/g/n/ac Infrastructure operating modes
  • 1 x 10/100/1000Mbps Gigabit Ethernet port
  • Powered from 802.3at PD on LAN port or external power adapter
  • Supports Multiple Input Multiple Output(MIMO) technology with 2TX/2RX
  • Allow auto fallback data rate for optimized reliability, throughput and transmission range
  • Supports wireless data encryption with 64/128-bit WEP standard for security
  • Supports enhance security for WPA-PSK, WPA2-PSK, WPA and WPA2
  • Advance wireless security of up to WPA2-RADIUS
  • Web-based configuration tools and management via WEB Browser
  • Supports WPS (Wi-Fi Protected Setup Specification Windows)
  • Supports statistics information
  • Supports Wireless Distribution System (WDS) for wireless network bridging
  • Supports Windows Based Management Utility


StandardsIEEE 802.11b/g/n Wireless LAN 2.4GHz
IEEE 802.11a/n/ac Wireless LAN 5GHz
IEEE 802.3ab Gigabit Ethernet
ANSI/IEEE 802.3 Auto negotiation
IEEE 802.3at PoE
Radio TechnologyIEEE 802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM)
IEEE 802.11b: Direct Sequence Spread Spectrum (DSSS)
Transmission Rate802.11ac: up to 866Mbps
802.11n: up to 300Mbps
802.11a/g: up to 54Mbps
802.11b: up to 11Mbps
Receiver Sensitivity11ac VHT80 MCS9: Typical – 51dBm @ 10% PER
11ac VHT40 MCS9: Typical – 54dBm @ 10% PER
11ac VHT20 MCS9: Typical – 57dBm @ 10% PER
11a/n HT40 MCS7/15/23: Typical – 61dBm @ 10% PER
11a/n HT20 MCS7/15/23: Typical – 64dBm @ 10% PER
11a/g 54Mbps: Typical – 65dBm @ 10% PER
11b 11Mbps: Typical – 83dBm @ 8% PER
Wireless LAN Frequency Range2.4GHz: 2412 ~ 2472 MHz ISM band (channels 1 ~ 13)
5GHz: 5180 ~ 5825 MHz ISM band (channels 36 ~ 165)
Modulation SchemesDBPSK/DQPSK/CCK for DSSS technique
BPSK/QPSK/16-QAM/64-QAM/256-QAM for OFDM technique
Media Access ProtocolCSMA/CA with ACK
Security64/128-bits WEP Encryption
MAC address filtering
Transmit Power (EIRP)2.4G Mode:
… FCC: 27dBm, ETSI:17dBm (max) @ 802.11b
… FCC: 26dBm, ETSI:17Bm (max) @ 802.11g
… FCC: 23dBm, ETSI:16dBm (max) @ 802.11n HT20
… FCC: 21dBm, ETSI:15dBm (max) @ 802.11n HT40 5G Mode
… FCC: 27dBm, ETSI:17dBm (max) @ 802.11a
… FCC: 26dBm, ETSI:17dBm (max) @ 802.11n HT20 / 802.11ac

… FCC: 23dBm, ETSI:17dBm (max) @ 802.11n HT40 / 802.11ac

… FCC: 21dBm, ETSI:17dBm (max) @ 802.11ac VHT80

Antenna2.4GHz: 2 x 4dBi Internal High Performance Antennas
5GHz: 2 x 4dBi Internal High Performance Antennas
Interface1000BASE-T Gigabit Ethernet port
Reset button
Power Jack
Channel2.4GHz: Channel 1 ~ 11(FCC), Channel 1 ~ 13(ETSI)
5 GHz: 36, 40, 44, 48, 149, 153, 157, 161 and 165 (FCC), 36, 40, 44,48(ETSI)
Range CoverageUp to 100 meters (depends on environment)
Diagnostic LEDsPower
2.4G Wireless
5G Wireless
Power SourceIEEE 802.3at PoE PD Power from LAN1
12VDC / 1A external power adapter
Consumption9.6 Watts (Maximum)
TemperatureOperating Temperature 0~50 degree C
Storage Temperature: -10~70 degree C
Humidity10% ~ 95% RH, no condensation
CertificationsFCC certificate for USA
CE certificate for Europe
Tele certification for Japan (TBD)
Dimensions (D x W x H)187 mm x187mmx46mm
Weight406 g
ManagementWeb base configuration utility via Ethernet
Windows based Management Utility
Wireless Controller (coming soon)