 | 24 x 100BASE-TX 10/100Mbps Auto-negotiation Fast Ethernet ports |
| 2 x 1000BASE-T Auto-negotiation Gigabit Ethernet ports |
| 2 x mini GBIC ports (shared) |
| Auto MDI/MDI-X for each port |
| Supports 8K absolute MAC addresses |
| Supports 256KBytes RAM for data buffering |
| Extensive front-panel diagnostic LEDs |
| Store-and-Forward switching method |
| Support IEE802.3x flow control for full- duplex and backpressure for half- duplex operation |
| Standard 19” Rack-mount size |
| Supports three methods user interface for Web-based, Command Line through RS-232 or TELNET |
| Support STP(802.1D), RSTP(802.1w) and MSTP(802.1s) |
| Supports VLAN, IEEE 802.1Q-based VLAN and GVRP |
| Supports VLAN group up to 128 Dynamic VLAN group or up to 256 Dynamic + Static VLAN group |
| Supports QoS for Port-based QoS , IEEE 802.1p_based QoS and DSCP |
| Supports 802.1x Port-based Access Control |
| Supports RADIUS Authentication |
| Supports SSH secured TELNET |
| Supports SNMP v1, v2c and v3 |
| Supports RMON for 4 groups |
| Supports RFC 3415 SNMP View Based Access Control Model MIB, Rapid STP MIB, Multiple STP MIB, Link Aggregation MIB, IEEE 802.1x Port-Based Network Authentication Control MIB, IPv4 MIB, RFC 2933 IGMP MIB, Private MIB |
| Link Aggregation (Trunking)(802.3ad) and LACP |
| Supports Port Mirroring |
| Support BootP /DHCP Client |
| Support SNTP and TFTP |
| Supports Port based bandwidth rate control (Ingress rate and Egress rate) |
| Supports port setting function allow user to enable/disable each port, set speed, duplex mode and device flow control |
| Support flash upgrading, configuration backup / restore, and factory reset |
