AC1750 Wave 1, 802.11ac/n/g/a/b
Dual band Concurrent Ceiling Mount Access Point
Perfect for business like schools, hotels, airports, shopping malls etc. The Ceiling AP supports 802.11ac/b/g/n and can be powered by PoE. It’s a perfect companion for the AP utility (AP system manager), allowing you to control your AP devices.

Features
- Compatible with IEEE 802.11ac wave 1 technology provides 3TX/3RX wireless speed up to 1300Mbps data rate
- Compatible with IEEE 802.11n high rate standard to provide wireless speed of 450Mbps data rate
- Compatible with IEEE 802.11g high rate standard to provide wireless speed of 54Mbps data rate
- Compatible with IEEE 802.3at PoE
- Simultaneously transmit both 2.4 GHz and 5 GHz wireless networks
- IEEE 802.11b/g/n/ac Infrastructure operating modes
- 1 x 10/100/1000Mbps Gigabit Ethernet port
- Powered from 802.3at PD on LAN port or external power adapter
- Supports Multiple Input Multiple Output(MIMO) technology with 3TX/3RX
- Allow auto fallback data rate for optimized reliability, throughput and transmission range
- Supports wireless data encryption with 64/128-bit WEP standard for security
- Supports enhance security for WPA-PSK, WPA2-PSK, WPA and WPA2
- Advance wireless security of up to WPA2-RADIUS
- Web-based configuration tools and management via WEB Browser
- Supports WPS (Wi-Fi Protected Setup Specification Windows)
- Supports statistics information
- Supports Wireless Distribution System (WDS) for wireless network bridging
- Supports Windows Based Management Utility
Specifications
Standards | IEEE 802.11b/g/n Wireless LAN 2.4GHz IEEE 802.11a/n/ac Wireless LAN 5GHz IEEE 802.3ab Gigabit Ethernet ANSI/IEEE 802.3 Auto negotiation IEEE 802.3at PoE |
Radio Technology | IEEE 802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM) IEEE 802.11b: Direct Sequence Spread Spectrum (DSSS) |
Transmission Rate | 802.11ac: up to 1300Mbps 802.11n: up to 450Mbps 802.11a/g: up to 54Mbps 802.11b: up to 11Mbps |
Receiver Sensitivity | 11ac VHT80 MCS9: Typical – 51dBm @ 10% PER 11ac VHT40 MCS9: Typical – 54dBm @ 10% PER 11ac VHT20 MCS9: Typical – 57dBm @ 10% PER 11a/n HT40 MCS7/15/23: Typical – 61dBm @ 10% PER 11a/n HT20 MCS7/15/23: Typical – 64dBm @ 10% PER 11a/g 54Mbps: Typical – 65dBm @ 10% PER 11b 11Mbps: Typical – 83dBm @ 8% PER |
Wireless LAN Frequency Range | 2.4GHz: 2412 ~ 2472 MHz ISM band (channels 1 ~ 13) 5GHz: 5180 ~ 5825 MHz ISM band (channels 36 ~ 165) |
Modulation Schemes | DBPSK/DQPSK/CCK for DSSS technique BPSK/QPSK/16-QAM/64-QAM/256-QAM for OFDM technique |
Media Access Protocol | CSMA/CA with ACK |
Security | 64/128-bits WEP Encryption WPA/WPA2-Personal WPA/WPA2-Enterprise MAC address filtering |
Transmit Power (EIRP) | 2.4G Mode: … FCC: 27dBm, ETSI:17dBm (max) @ 802.11b … FCC: 26dBm, ETSI:17Bm (max) @ 802.11g … FCC: 23dBm, ETSI:16dBm (max) @ 802.11n HT20 … FCC: 21dBm, ETSI:15dBm (max) @ 802.11n HT40 5G Mode … FCC: 27dBm, ETSI:17dBm (max) @ 802.11a … FCC: 26dBm, ETSI:17dBm (max) @ 802.11n HT20 / 802.11ac VHT20: VHT40: |
Antenna | 2.4GHz: 3 x 4dBi Internal High Performance Antennas 5GHz: 3 x 4dBi Internal High Performance Antennas |
Interface | 1000BASE-T Gigabit Ethernet port Reset button Power Jack |
Channel | 2.4GHz: Channel 1 ~ 11(FCC), Channel 1 ~ 13(ETSI) 5 GHz: 36, 40, 44, 48, 149, 153, 157, 161 and 165 (FCC), 36, 40, 44,48(ETSI) |
Range Coverage | Up to 100 meters (depends on environment) |
Diagnostic LEDs | Power 2.4G Wireless 5G Wireless LAN |
Power Source | IEEE 802.3at PoE PD Power from LAN1 12VDC / 1.5A external power adapter |
Consumption | 14 Watts (Maximum) |
Temperature | Operating Temperature 0~50 degree C Storage Temperature: -10~70 degree C |
Humidity | 10% ~ 95% RH, no condensation |
Certifications | FCC certificate for USA CE certificate for Europe Tele certification for Japan (TBD) |
Dimensions (D x W x H) | 187 mm x187mmx46mm |
Weight | 415 g |
Management | Web base configuration utility via Ethernet Windows based Management Utility Wireless Controller (coming soon) |