AC2200 WiFi 5 Wave 2

Tri-band Concurrent Ceiling Mount Access Point

The high performance AC2200 Tri-Band PoE+ Indoor Wireless Access Point, features three concurrent WiFi bands to maximize device networking speeds: two separate high performance 802.11ac networks (5GHz1: 867Mbps / 5GHz2: 867Mbps), and a 400Mbps Wireless N network. MU-MIMO technology processes multiple data streams simultaneously, increasing real-time WiFi performance on the WiFi access point when multiple devices access the network. The WiFi access point features advanced access control, QoS, traffic management, band steering, and captive portal support. The AP supports Access Point (AP), Client Bridge, Wireless Distribution System Access Point (WDS AP), WDS Bridge, WDS Station, and Repeater modes

Features

  • Compatible with IEEE 802.11ac technology provides 2TX/2RX wireless speed up to 867Mbps data rate
  • Compatible with IEEE 802.11n high rate standard to provide wireless speed of 400Mbps data rate
  • Compatible with IEEE 802.11g high rate standard to provide wireless speed of 54Mbps data rate
  • Compatible with IEEE 802.3at PoE
  • Simultaneously transmit 2.4 GHz, and both 5GHz1 and 5GHz2 wireless networks
  • IEEE 802.11b/g/n/ac Infrastructure operating modes
  • 1 x 10/100/1000Mbps Gigabit Ethernet port with PoE function (802.3at, PD)
  • 1 x 10/100/1000Mbps Gigabit Ethernet port
  • Supports PoE power detection
    • PD in 802.3af: when the AP detects using PoE 802.3af at 12.95 Watt, the AP will turn into dual-band (2.4GHz + 5GHz) mode.
  • Two Gigabit Ethernet ports are half and full duplex compliant under IEEE standards 802.3x and 802.3z. Each port auto-negotiates wire speed, duplex, and MDI / MDIX settings.
  • Supports Multiple Input Multiple Output (MIMO) technology with 2TX/2RX
  • Supports Downlink Multi-User MIMO (MU-MIMO) and TX Beamforming technology
  • Allow auto fallback data rate for optimized reliability, throughput and transmission range
  • Supports wireless data encryption with 64/128-bit WEP standard for security
  • Supports enhance security for WPA-PSK, WPA2-PSK, WPA and WPA2
  • Advance wireless security of up to WPA2-RADIUS
  • Web-based configuration tools and management via WEB Browser
  • Supports WPS (Wi-Fi Protected Setup Specification Windows)
  • Supports statistics information
  • Supports Wireless Distribution System (WDS) for wireless network bridging
  • Supports Windows Based Management Utility
  • Support Kensington lock
  • Support 5 single color LED’ (i.e. LAN1, LAN2, 2.4GHz, 5GHz1 and 5GHz2 LED’s)
  • Support 1 dual color LED. (i.e. Power LED)
  • 1 x Reset Button for Device Reboot or Reset to Default functions.
  • 1 x Power Jack for the supplied power source from Power Adapter.
  • 1 x Ejector Push Button is hardware Power on/off switch

Specifications

StandardsIEEE 802.11b/g/n Wireless LAN 2.4GHz
IEEE 802.11a/n/ac Wireless LAN 5GHz
IEEE 802.3ab Gigabit Ethernet
ANSI/IEEE 802.3 Auto negotiation
IEEE 802.3at PoE
Radio TechnologyIEEE 802.11a/g/n/ac: Orthogonal Frequency Division Multiplexing (OFDM)
IEEE 802.11b: Direct Sequence Spread Spectrum (DSSS)
Transmission Rate802.11ac: up to 867Mbps
802.11n: up to 400Mbps (256QAM)
802.11a/g: up to 54Mbps
802.11b: up to 11Mbps
Receiver Sensitivity11ac VHT80 MCS9: Typical -56 dBm @ 10% PER
11ac VHT40 MCS9: Typical -59 dBm @ 10% PER
11ac VHT20 MCS8: Typical -64 dBm @ 10% PER
11g/ac VHT40 MCS9: Typical -61 dBm @ 10% PER
11g/n HT40 MCS7/15: Typical -65 dBm @ 10% PER
11g/n HT20 MCS7/15: Typical -67 dBm @ 10% PER
11a 54Mbps: Typical -70 dBm @ 10% PER
11g 54Mbps: Typical -72 dBm @ 10% PER
11b 11Mbps: Typical -85 dBm @ 8% PER
Wireless LAN Frequency Range2.4GHz: 2412 ~ 2472 MHz ISM band (channels 1 ~ 13)
5GHz1: 5180 ~ 5320 MHz U-NII band (channels 36 ~ 64)
5GHz2: 5500 ~ 5825 MHz U-NII band (channels 100 ~ 165)
Modulation SchemesDBPSK/DQPSK/CCK for DSSS technique
BPSK/QPSK/16-QAM/64-QAM/256-QAM for OFDM technique
Media Access ProtocolCSMA/CA with ACK
Security64/128-bits WEP Encryption
WPA/WPA2-Personal
WPA/WPA2-Enterprise
MAC address filtering
Transmit Power (EIRP)2.4GHz Mode:

FCC:27.41dBm, ETSI:17.82dBm, IC:27.41dBm @ 802.11b (max)
FCC:32.23dBm, ETSI:18.71dBm, IC:32.23dBm @ 802.11g (max)
FCC:32.41dBm, ETSI:18.69dBm, IC:32.41dBm @ 802.11n HT20 / 802.11ac VHT20 (max)
FCC:24.80dBm, ETSI:18.79dBm, IC:24.80dBm @ 802.11n HT40 / 802.11ac VHT40 (max)

5GHz1 Mode:

FCC:33.76dBm, ETSI:21.52dBm, IC:18.74dBm @ 802.11a (max)
FCC:33.67dBm, ETSI:21.60dBm, IC:18.63dBm @ 802.11n HT20 / 802.11ac VHT20 (max)
FCC:31.45dBm, ETSI:21.69dBm, IC:21.21dBm @ 802.11n HT40 / 802.11ac VHT40 (max)
FCC:21.15dBm, ETSI:22.13dBm, IC:21.13dBm @ 802.11ac VHT80 (max)

5GHz2 Mode:

FCC:33.18dBm, ETSI:28.40dBm, IC:33.18dBm @ 802.11a (max)
FCC:33.37dBm, ETSI:28.74dBm, IC:33.37dBm @ 802.11n HT20 / 802.11ac VHT20 (max)
FCC:32.17dBm, ETSI:28.70dBm, IC:32.17dBm @ 802.11n HT40 / 802.11ac VHT40 (max)
FCC:30.55dBm, ETSI:27.86dBm, IC:30.55dBm @ 802.11ac VHT80 (max)

Antenna2.4GHz: 2 x 4dBi Internal High Performance Antennas
5GHz1: 2 x 4dBi Internal High Performance Antennas
5GHz2: 2 x 4dBi Internal High Performance Antennas
InterfaceLAN: 2 x 10/100/1000Mbps Auto-MDIX Gigabit Ethernet port
Reset button
Power Jack
USB 2.0 Host (optional, for system maintain)
Channel2.4GHz: Channels 1 ~ 11 (FCC), Channels 1 ~ 13 (ETSI)
5 GHz1: Channels 36, 40, 44, 48 (FCC, ETSI)
5 GHz2: Channels 149, 153, 157, 161, 165 (FCC)
Range CoverageUp to 100 meters (depends on environment)
Diagnostic LEDsPower
2.4GHz Wireless
5GHz1 Wireless
5GHz2 Wireless
LAN1
LAN2
Power SourceIEEE 802.3at PoE PD Power from LAN1
12VDC / 2.0A external power adapter
Consumption18.96 Watts (Maximum)
TemperatureOperating Temperature 0~40 degree C
Storage Temperature: -10~70 degree C
Humidity10% ~ 95% RH, no condensation
CertificationsFCC certificate for USA
CE certificate for Europe
Tele certification for Japan (TBD)
Dimensions (D x W x H)214.37 x 214.74 x 48 mm
ManagementWeb base configuration utility via Ethernet